Assignment Chef icon Assignment Chef

[SOLVED] Cs 576 – assignment 1 theory part (30 points) question 1: (5 points) the following sequence of real numbers has been obtained

5.0 1 customer review Digital download

Digital download

$25.00

Availability
In stock
Checkout
One item

Need a hand?

Message us on WhatsApp for payment or download support.

WhatsApp QR code
Question 1: (5 points)
The following sequence of real numbers has been obtained sampling an audio signal: 1.8,
2.2, 2.2, 3.2, 3.3, 3.3, 2.5, 2.8, 2.8, 2.8, 1.5, 1.0, 1.2, 1.2, 1.8, 2.2, 2.2, 2.2, 1.9, 2.3, 1.2,
0.2, -1.2, -1.2, -1.7, -1.1, -2.2, -1.5, -1.5, -0.7, 0.1, 0.9 Quantize this sequence by dividing
the interval [-4, 4] into 32 uniformly distributed levels by placing the level 0 at -3.75, the
level 1 at -3.5, and so on and level 31 at 4.00. Also, remember that quantization should
result in least error
 Write down the quantized sequence. (4 points)
 How many bits do you need to transmit it? (1 points)Question 2: (10 points)
A high-definition film color camera has 1080 lines per frame, 1920 pixels per line, with a
24 Hz capture frame rate. Each pixel is quantized with 12 bits per channel during the
quantization process.The capture pipeline employs the follow sequence
1. YUV 4:2:0 color subsampling scheme
2. An optional feature, to the signal to standard definition CIF (352×288)
3. An obligatory MPEG2 compression phase
4. Disk write with a varying disk write speed (12 to 36 Mbytes per second).Answer the following questions
 If the second optional feature is off, what minimal compression ratio needs be
achieved by the third compression step process? (4 points)
 If the second optional feature is turned on to produce CIF format, how does your
previous answer change? (3 points)
 If original pixels were square, how do the pixel stretch with the second optional
feature turned on.? (3 points)Question 3: (15 points)
Temporal aliasing can be observed when you attempt to record a rotating wheel with a
video camera. In this problem, you will analyze such effects. Assume there is a car
moving at 36 km/hr and you record the car using a film, which traditionally records at 24
frames per second. The tires have a diameter of 0.4244 meters. Each tire has a white
mark to gauge the speed of rotation. (15 points) If you are watching this projected movie in a theater, what do you perceive the
rate of tire rotation to be in rotations/sec? (3 points) If you use your camcorder to record the movie in the theater and your camcorder
is recording at one third film rate (ie 8 fps), at what rate (rotations/sec) does the
tire rotate in your video recording (6 points) The driver decides to participate in race, and buys tires that safely allow a max
speed of 180 km/hr. What must be the diameter of the tire if no temporal aliasing
needs to be witnessed in the recording? (6 points)This assignment will help you gain a practical understanding of Quantization and
Subsampling to analyze how it affects visual media types like images and video.
We have provided you with a Microsoft Visual C++ project and a java class to display
two images side by side (original on the left and a processed output on the right).
Currently both left and right correspond to the same input image. You are free to any of
these as a start.Your program will be invoked using seven parameters where
YourProgram.exe C:/myDir/myImage.rgb Y U V Sw Sh A
 The first parameter is the name of the image, which will be provided in an 8 bit
per channel RGB format (Total 24 bits per pixel).You may assume that all
images will be of the same size for this assignment (HD size = 1920wx1080h),
more information on the image format will be placed on the class website
 The next three parameters are integers control the subsampling of your Y U and
V spaces respectively.For sake of simplicity, we will follow the convention that
subsampling occurs only along the width dimension and not the height. Each of
these parameters can take on values from 1 to n for some n, 1 suggesting no sub
sampling and n suggesting a sub sampling by n The next two parameters are single precision floats Sw and Sh which take positive
values < 1.0 and control the scaled output image width and height independently.
 Finally a integer A ( 0 or 1) to suggest that antialiasing (prefiltering needs to be
performed). 0 indicates no antialiasing and vice versaExample invocations shown below should give you a fair idea about what your input
parameters do and how your program will be tested.
1. YourProgram,exe image1.rgb 1 1 1 1.0 1.0 0
No subsampling in the Y, U or V, and no scaling in w and h and no antialiasing, which
implies that the output is the same as the input2. YourProgram,exe image1.rgb 1 1 1 0.5 0.5 1
No subsampling in Y, U or V, but the image is one fourth its original size (antialiased)3. YourProgram,exe image1.rgb 1 2 2 1.0 1.0 0
The output is not scaled in size, but the U and V channels are subsampled by 2. No
subsampling in the Y channels.Now for the details – In order the display an image on a display device, the normal choice
is an RGB representation. Here is the dataflow pipeline that illustrates all the steps.
1.Read Input
Image (RGB)
Display Input
Image
2. Convert to
YUV space
3. Process YUV
subsampling
4. Adjust up sampling
for display
5. Convert
back to RGB
space
Display Output
ImageThis code is already provided to you,
if you choose to make use of it
The RGB to YUV with the conversion
matrix is given below
Sub sample Y U and V separately
according to the input parameters
6. Scale RGB image
with Sw & Sh
respecting choice of
AAdjust sample values. Although samples
are lost, prior to further process, all
values must be interpolated in place
Apply the inverse matrix to get the RGB
data
Scale the RGB image and display
final output
Conversion of RGB to YUV
Given R, G and B values the conversion from RGB to YUV is given by a matrix
multiplication
Y 0.299 0.587 0.114 R
U = 0.596 -0.274 -0.322 G
V 0.211 -0.523 0.312` BRemember that if RGB channels are represented by n bits each, then the YUV channels
are also represented by the same number of bits.Conversion of YUV to RGB
Given R, G and B values the conversion from RGB to YUV is given by the inverse
matrix multiplication
R 1.000 0.956 0.621 Y
G = 1.000 -0.272 -0.647 U
B 1.000 -1.106 1.703 VSub sampling of YUV & processing
Sub sampling, as you know will reduce the number of samples for a channel.
Eg for the input parametersYourProgram.exe image1.rgb 1 2 2 256In this example, the YUV image is not subsampled in Y, but by 2 in U and by 2 in V
resulting in
When converting back to the RGB space, all the YUV channels have to be of the same
size.However the sampling throws away samples, which have to be filled in
appropriately by average the neighborhood values. For example, for the above case a
local image area would look like
Y11U11V11 Y12 Y13U13V13 Y14 . . . . . line 1
Y21U21V21 Y22 Y23U23V23 Y24 . . . . . line 2
Y31U31V31 Y32 Y33U33V33 Y34 . . . . . line 3
Y41U41V41 Y42 Y43U43V43 Y44 . . . . . line 4The missing values may be filled in using filters. Here is an example
U12 = (U11 + U13)/2 V12 = (V11 + V13)/2
U14 = (U13 + U15)/2 V14 = (V13 + V15)/2Or you may choose to invent your own filter using appropriate valid neighborhood
samples
Y11U11V11 Y12U12V12 Y13U13V13 Y14U14V14 . . . . . line1
Y21U21V21 Y22U22V22 Y23U23V23 Y24U24V24 . . . . . line 2
Y31U31V31 Y32U32V32 Y33U33V33 Y34U34V34 . . . . . line 3
Y41U41V41 Y42U42V42 Y43U43V43 Y44U44V44 . . . . . line 4Note the samples that you take to fill in values will change depending on the subsampling
parameters. The YUV components can now be converted to RGB space.Scaling with Antialiasing
Your output image width and height will change to a new (smaller) value depending on
scale factors Sw and Sh. You will need to create the output image by resampling the input
image. This can be achieved by inverse mapping all destination pixel indexes [i,j] to their
source location indexes. Depending on whether you need to perform antialiasing the
destination resampled pixel value can be the value of your inverse mapped source pixel
(A=0) or the average of small neighborhood around the inverse mapped source pixel
(A=1). To compute the average, you may use a 3×3 kernel.What should you submit ?
 Your source code, and your project file or makefile, if any, using the submit
program. Please do not submit any binaries or data files. We will compile your
program and execute our tests accordingly. Along with the program, also submit an electronic document (word, pdf,
pagemaker etc format) using the submit program that answers the fore-mentioned
analysis questions. You may use any (or all) input images for this analysis.