[SOLVED] Comp8051 – operating system engineering – assignment 2
5.0
1 customer review
Digital download
Digital download
$25.00
- Availability
- In stock
- Checkout
- One item
Need a hand?
Message us on WhatsApp for payment or download support.
The file system does not use block 0 (it holds the boot sector). Block 1 is called
the superblock, it contains metadata about the file system (the file system size in
blocks, the number of data blocks, the number of inodes, and the number of
blocks in the log).Blocks starting at 2 hold inodes. After those come bitmap
blocks tracking which data blocks are in use. Most of the remaining blocks are
data blocks. The blocks at the end of the disk hold the logging layer’s log.The term inode can have one of two related meanings. It might refer to the ondisk data structure ( struct dinode, fs.h ) containing a file’s size and list of data
block numbers. Or “inode” might refer to an in-memory inode ( struct inode,
file.h ), which contains a copy of the on-disk inode as well as extra information
needed within the kernel.The on-disk inode is defined by a struct dinode. The type field distinguishes
between files, directories, and special files (devices). A type of zero indicates
that an on-disk inode is free. The nlink field counts the number of directory
entries that refer to this inode, in order to recognize when the on-disk inode and
its data blocks should be freed. The size field records the number of bytes of
content in the file. The addrs array records the block numbers of the disk blocks
holding the file’s content.The function readi is essentially called by the user level read function to read an
amount of data from a file. The readi parameters are:
readi(struct inode *ip, char *dst, uint off, uint n)The inode pointed to by ip abstracts the file layout/structure in the filesystem.
Readi uses the addrs array to find the block numbers that are associated with
the file. It then reads in all the blocks from the disk to satisfy the read request, in
xv6 each block is the same size as a disk sector, which is 512 bytes.The function Bmap makes it easy for readi and writei to get at an inode’s data.
Readi (5503) starts by making sure that the offset and count are not beyond the
end of the file. Reads that start beyond the end of the file return an error (5514-
5515) while reads that start at or cross the end of the file return fewer bytes
than requested (5516-5517) .The main loop processes each block of the file,
copying data from the buffer into dst (5519-5524) . writei (5553) is identical to
readi, with three exceptions: writes that start at or cross the end of the file grow
the file, up to the maximum file size (5566-5567) ; the loop copies data into the
buffers instead of out (5572) ; and if the write has extended the file, writei must
update its size (5577-5580) .Read chapter 6 of the xv6 book and briefly explain how the read calls in
the following code taken from cat.c
void cat(int fd)
{
int n;
while((n = read(fd, buf, sizeof(buf))) > 0) {
if (write(1, buf, n) != n) {
printf(1, “cat: write error ”);
exit();
}
}
if(n < 0){
printf(1, “cat: read error ”);
exit();
}
}are associated with sectors on the disk by the xv6 operating system.
You may use a diagram such as the one here to illustrate your
answer.
(10 marks)Read the sections on Drivers, Code: Drivers in chapter 3 and section 36.8 of filedevices.pdf, which gives a summary of the IDE disk controller protocol. See in
particular the code in ide.c. See image belowThe xv6 source code includes a working IDE driver in ide.c. For example the
piece of code in idestart
outb(0x1f6, 0xe0 | ((b->dev&1)<<4) | ((b→sector>>24)&0x0f));
is associated with:
I/O Address 0x1F6 = 1B1D TOP4LBA: B=LBA, D=drive
The 0xe is to set 1B1 in bits 5,6,7 B=1 indicates that we are going to have the
low 4 bits at address 0x1f6 set the top 4 bits of the Logical Block Address (LBA).
((b→dev&1)<<4) sets the D bit.
((b→sector>>24)&0x0f)) sets the top 4 bits of LBA to low four bits at address
0x1f6.An IDE disk presents a simple interface to the Disk system, consisting of four
types of register: control, command block, status, and error. These registers are
available by reading or writing to specific “I/O addresses” (such as 0x3F6 ) using
(on x86) the in and out I/O instructions.
On page 48 of the xv6 book we read “The xv6 bootloader issues disk read
commands and reads the disk controller status bits repeatedly until the data is
ready (see Appendix B). This polling or busy waiting is fine in a boot loader,
which has nothing better to do. In an operating system, however, it is more
efficient to let another process run on the CPU and arrange to receive an
interrupt when the disk operation has completed.”a) Explain how the xv6 operating system uses interrupts to schedule I/O
requests to the disk?
b) Explain how the bootloader interfaces with the IDE controller to load
the xv6 operating system – see Appendix B of the xv6 book (section
“Code: C bootstrap” in particular) and bootmain.c in the xv6 source
code?
(12 marks)Currently xv6 files are limited to 140 sectors, or 71,680 bytes. This limit comes
from the fact that an xv6 inode contains 12 “direct” block numbers and one
“singly-indirect” block number, which refers to a block that holds up to 128 more
block numbers, for a total of 12+128=140. You’ll change the xv6 file system
code to support a “doubly-indirect” block in each inode, containing 128
addresses of singly-indirect blocks, each of which can contain up to 128
addresses of data blocks. The result will be that a file will be able to consist of up
to 16523 sectors (or about 8.5 megabytes).Preliminaries
Modify your Makefile’s CPUS definition so that it reads:
CPUS := 1
Add
QEMUEXTRA = -snapshot
right before QEMUOPTS
The above two steps speed up qemu tremendously when xv6 creates large files.
mkfs initializes the file system to have fewer than 1000 free data blocks, too few
to show off the changes you’ll make. Modify param.h to set FSSIZE to:
#define FSSIZE 20000 // size of file system in blocksDownload big.c into your xv6 directory, add it to the UPROGS list, start up xv6,
and run big. It creates as big a file as xv6 will let it, and reports the resulting
size. It should say 140 sectors.What to Look At
The format of an on-disk inode is defined by struct dinode in fs.h. You’re
particularly interested in NDIRECT, NINDIRECT, MAXFILE, and the addrs[]
element of struct dinode. Look here for a diagram of the standard xv6
inode.The code that finds a file’s data on disk is in bmap() in fs.c. Have a look at it and
make sure you understand what it’s doing. bmap() is called both when reading
and writing a file. When writing, bmap() allocates new blocks as needed to hold
file content, as well as allocating an indirect block if needed to hold block
addresses.
bmap() deals with two kinds of block numbers. The bn argument is a “logical
block” — a block number relative to the start of the file. The block numbers in ip-
>addrs[], and the argument to bread(), are disk block numbers. You can view
bmap() as mapping a file’s logical block numbers into disk block numbers.Your Job
Modify bmap() so that it implements a doubly-indirect block, in addition to direct
blocks and a singly-indirect block. You’ll have to have only 11 direct blocks,
rather than 12, to make room for your new doubly-indirect block; you’re not
allowed to change the size of an on-disk inode. The first 11 elements of ip-
>addrs[] should be direct blocks; the 12th should be a singly-indirect block (just
like the current one); the 13th should be your new doubly-indirect block.
You don’t have to modify xv6 to handle deletion of files with doubly-indirect
blocks.If all goes well, big will now report that it can write 16523 sectors. It will take big
a few dozen seconds to finish.
Hints
Make sure you understand bmap(). Write out a diagram of the relationships
between ip->addrs[], the indirect block, the doubly-indirect block and the
singly-indirect blocks it points to, and data blocks. Make sure you understand
why adding a doubly-indirect block increases the maximum file size by 16,384
blocks (really 16383, since you have to decrease the number of direct blocks by
one).Think about how you’ll index the doubly-indirect block, and the indirect blocks it
points to, with the logical block number.
If you change the definition of NDIRECT, you’ll probably have to change the size
of addrs[] in struct inode in file.h. Make sure that struct inode and
struct dinode have the same number of elements in their addrs[] arrays.
If you change the definition of NDIRECT, make sure to create a new fs.img, since
mkfs uses NDIRECT too to build the initial file systems. If you delete fs.img, make
on Unix (not xv6) will build a new one for you.If your file system gets into a bad state, perhaps by crashing, delete fs.img (do
this from Unix, not xv6). make will build a new clean file system image for you.
Don’t forget to brelse() each block that you bread().You should allocate indirect blocks and doubly-indirect blocks only as needed,
like the original bmap().
(8 marks)